Upload your PSD file with smart object layers to SudoMock, or use a template from the library directly via the API.
API Render DocsReplace smart object content with your design. Works with images, text, and patterns.
Smart Objects GuideGenerate high-resolution product images in PNG, JPG, or WebP format. Batch process multiple designs.
PSD PreparationPSD
RGB
0
6
| Angle | Type | Size | Smart Objects | Primary |
|---|---|---|---|---|
| Three-Quarter Hero Shot | three-quarter-hero | — | 0 | Yes |
| Straight-On Front View | straight-front | — | 0 | — |
| Lifestyle Hand-Held Shot | lifestyle-hand-held | — | 0 | — |
| Overhead Lid Detail | overhead-lid | — | 0 | — |
| Material Detail & Reflection | detail-reflection | — | 0 | — |
| Low-Angle Environmental Shot | low-angle-contextual | — | 0 | — |
The design placement area covers the white exterior surface of the tumbler body, wrapping around the cylindrical section from below the lid rim down to the tapered waist. This white zone is where SudoMock's rendering engine composites your artwork using Smart Object layers. The tapered lower section may also accept design elements depending on the specific template.
For powder-coated tumbler surfaces with visible texture, the Multiply blend mode allows the surface grain to show through your design, creating a realistic printed appearance. For glossy or smooth stainless finishes, Normal blend mode produces clean, solid design application. SudoMock supports all 27 Photoshop blend modes.
Yes. This template matches the tapered cylindrical profile of the Stanley Quencher H2.0 FlowState Tumbler (40 oz, Style #10-10824-279). The dimensions, lid style with sliding cover, and body proportions correspond to the Stanley 40oz form factor. It is also suitable for similar tumblers from YETI, Polar Camel, and ORCA.
This template includes six angles: a three-quarter hero shot, straight-on front view, lifestyle hand-held shot showing scale against a human hand, overhead lid detail, material close-up showing powder-coat texture, and a low-angle environmental shot. All are photographed on a café table with natural window lighting.
Yes. The white base surface and visible powder-coat texture make this template suitable for previewing sublimation designs. The Multiply blend mode lets the surface texture show through the overlaid artwork, simulating how sublimation ink absorbs into the coated surface. This applies to both full-wrap and partial designs.
This template represents a 40oz insulated tumbler (1.18L capacity) with dimensions of approximately 3.86" L x 5.82" diameter. The proportions match standard 40oz tumblers from Stanley, though sellers working with 30oz vessels from YETI or Polar Camel may find the general silhouette compatible for listing previews.
This template is compatible with POD workflows on Printful, Printify, Gelato, and other providers that offer custom tumblers. You can render mockups via SudoMock's API or Dashboard and use the output images directly in Etsy, Shopify, Amazon, and WooCommerce product listings. Native integrations with n8n, Zapier, Make, and Airtable support automated catalog generation.
Generate unlimited product mockups with our API and AI tools. Upload your designs and get high-resolution images in seconds.
Format
PSD · RGB
Angles
6 views
AI-powered rendering engine — ready in seconds
Drinkware is consistently ranked among the top-selling print-on-demand product categories alongside apparel and accessories.
Stainless steel tumblers represent a growing segment of the custom drinkware market.
E-commerce product imagery is widely cited as the primary factor influencing online purchase decisions.
Multi-angle mockups provide buyers with enough visual information to evaluate custom tumbler designs before ordering.
Sublimation and powder-coat printing are the two most common decoration methods for stainless steel tumblers in the POD industry.
Mockup templates with visible surface texture support realistic previews for both sublimation and powder-coat workflows.
The 20oz, 30oz, and 40oz sizes account for the majority of custom tumbler orders on platforms like Etsy and Shopify.
This 40oz tumbler template covers the largest and fastest-growing size segment in insulated drinkware.
Adobe Stock catalogs over 25,000 tumbler mockup assets, indicating substantial demand for this product category in creative marketplaces.
The volume of available tumbler mockup templates reflects high seller demand for drinkware visualization tools.
“We list tumblers in three sizes across four color variants, so each new design generates twelve mockups. Running those through an API at fractions of a cent each is the only way to keep catalog updates manageable.”
“The lifestyle angle with a hand holding the tumbler consistently outperforms flat product shots in our A/B tests on Shopify. Customers want to see how the design looks at actual scale.”
“Stainless steel tumbler mockup templates are among the most searched drinkware assets for print-on-demand product visualization.”
“Tumbler mockup templates with multiple angles and lifestyle context are considered a standard requirement for POD and dropshipping drinkware catalogs.”
“Free and paid tumbler mockup generators vary widely in angle coverage, with multi-angle sets providing more complete product listings for e-commerce sellers.”
This mockup template displays a white powder-coated stainless steel tumbler photographed in a Parisian café setting. The tumbler has a tapered cylindrical body that narrows at the lower third, then widens slightly toward the base. A clear plastic lid with a sliding drink opening sits on top, secured by two small tab-style clips on opposite sides. The exterior surface has a matte, slightly textured powder-coat finish in white. All six angles are shot on a worn honey-colored oak café table with natural wood grain and vintage patina. Warm morning sunlight filters through tall French windows with sheer curtains, casting soft directional light from the upper left.
The primary three-quarter hero shot captures the tumbler from a 45-degree angle on the right side. The brushed stainless steel version is shown first, revealing the metallic grain of the bare steel surface. The same angle is repeated with the white powder-coated version, where the matte finish absorbs light more evenly. Both shots show the full tumbler body from base to lid, with the clear plastic lid and its tab clips clearly visible.
The straight-on front view presents the white tumbler centered on the table, showing the maximum vertical design area from the rim down to the tapered waist. The café windows and building facades appear blurred in the background.
The lifestyle hand-held shot shows a person seated at the café table, gripping the white tumbler with their right hand around the upper portion. The individual wears a light-colored linen button-up shirt with rolled sleeves. Their hand wraps naturally around the tumbler body, providing scale reference. Cobblestone pavement is visible in the background.
The overhead lid detail shot looks straight down at the tumbler's clear lid mechanism. A rectangular sliding cover with a small pull tab is centered on the lid. Two opposing clip tabs secure the lid to the tumbler rim. A golden croissant on a white plate sits to the left, and a folded copy of Le Monde newspaper sits to the right on the oak table surface.
The material detail and reflection shot is a close-up of the upper portion of the white tumbler. The powder-coat texture is clearly visible at this magnification: a fine, slightly bumpy surface characteristic of electrostatic powder coating. The clear lid edge catches light along its rim.
The low-angle environmental shot captures the white tumbler from below eye level with a glossy white finish variant. This angle emphasizes the tapered silhouette and shows how the narrow base would fit standard cup holders. Window reflections appear on the glossy surface.
This template matches the profile of the Stanley Quencher H2.0 FlowState Tumbler (40 oz / 1.18L, Style #10-10824-279 in Frost). Key specs: 90% recycled 18/8 stainless steel construction, double-wall vacuum insulation, 3-position FlowState lid, reusable straw compatible. Dimensions are 3.86" L x 5.82" diameter. Weight is 1.4 lbs. BPA-free and dishwasher safe. The tumbler keeps drinks cold for 8+ hours and iced for 30+ hours.
The white exterior surface serves as the design placement zone for API rendering. The tapered body provides a wraparound print area across the upper cylindrical section and the narrower lower portion. For sublimation or powder-coat print workflows, the matte texture visible in the detail shot allows Multiply blend mode compositing where the surface grain shows through overlaid artwork.
This template suits sellers working with Stanley 40oz blanks, YETI Rambler 30oz or 20oz tumblers, Polar Camel insulated tumblers, ORCA Chaser series, and Hogg tumblers. Sublimation blank suppliers like The Stainless Depot, MakerFlo, and Bulk Tumblers carry compatible vessels in similar profiles.
Browse additional drinkware templates in the SudoMock mockup library, including ceramic mug mockups, enamel camping mug mockups, stainless steel water bottle mockups, and sports bottle mockups.
This template is rendered through SudoMock's PSD rendering API at $0.002 per render. Upload your design via the API endpoint or use the visual Dashboard Playground. Output formats include WebP, PNG, and JPEG up to 10,000px resolution.